Are you grappling with the all-too-common issue of your Jabra Elite 65t earbuds playing a silent symphony? You’re not alone. Many users have reported problems with the left Earbud and a few with the right one.
But don’t worry. We’ve got your back. This comprehensive guide will walk you through some simple yet effective solutions to breathe life back into your Jabra Elite 65t left earbud not working.
Before you consider contacting customer support or making a trip to the nearest authorized service center, why not try your hand at some DIY troubleshooting? These quick fixes can get your earbuds back on track in less than 15 minutes. So, let’s dive right in!
Why Is Your Jabra Elite 65t Left Earbud Not Working?
Before we jump into the solutions, let’s take a moment to understand the common issues that could cause your Jabra Elite 65t left Earbud to stop working:
Insufficient Charge: If one Earbud has significantly less charge than the other, it may fail to work or connect.
Dirty Connector Pins: Dirt or dust on the connector pins on the earbuds or the charging case can prevent the earbuds from charging.
Outdated Firmware: Outdated firmware can cause earbuds to malfunction.
Bluetooth Connection Issues: Sometimes, the problem might be the Bluetooth connection between your device and the earbuds.
Misconfigured Audio Balance Settings: If the audio balance settings on your device are not set correctly, only one side of the earbuds might work.
If you’re struggling to watch Steameast on Firestick than don’t worry. we got you covered check out our detailed guide on it.
How to fix the Jabra Elite 65t left Earbud not working (software fixes)
1. Factory Reset: Re-establish Connection with Your 65t Left Earbud
A factory reset can often be the magic wand that resolves many issues. It wipes clean the list of paired devices and all stored settings, giving your earbuds a fresh start.
Here’s how you can perform a factory reset:
Step 1: Remove both earbuds from the charging case.
Step 2: Press and hold the Jabra button on both earbuds for 10 seconds until the LEDs flash purple.
Step 3: Navigate to the Bluetooth settings on your device and forget/delete the Jabra Elite 65t earbuds.
Step 4: Now, you’re all set to reconnect your earbuds to your device.
2. Firmware Update: Keep Your Earbuds Up-to-Date
Ensuring your earbuds are running on the latest firmware can help resolve performance issues. You can check for updates using the Sound+ app.
Here’s how to update your firmware:
Step 1: Connect either of the earbuds to a device with the Sound+ app installed.
Step 2: Open the Sound+ app and navigate to Settings > Headset Firmware.
Step 3: Place the earbuds back in the charging case and close the lid if an update is available.
Step 4: The LED on the charging case will flash purple during the update.
Step 5: Do not remove the earbuds from the case during the update. The Sound+ app will notify you when the update is complete.
3. Reinstall the Sound+ App: Start Fresh
On occasion, the easiest solution can yield the most powerful results. Uninstalling and reinstalling the Sound+ app can clear any cache or settings that might be causing the issue.
To do this, delete the existing Sound+ app from your device and visit the Google Play Store or Apple App Store to download the latest version.
1. Power On and Connect: Is Your Elite 65t Left Earbud Awake and Linked?
It may sound basic, but ensuring your left Earbud is powered on and connected to the right one is the first step. When removed from the charging case, the Elite 65t earbuds automatically search and connect to the nearest paired device. If the left Earbud doesn’t connect immediately, it may enter ‘sleep mode’ and become unresponsive.
Moreover, the left Earbud is designed to power off when it isn’t linked with the right Earbud for 15 minutes outside the charging case. Hold the ‘Volume Down’ button for a second to power it back on.
Tip 1: You can check the battery level of either Earbuds at any time by placing them into the charging case and closing the lid. The battery LED inside the charging case will flash red, yellow, or green to indicate the earbuds’ current battery status as high, medium, or low.
Tip 2: If the left Earbud fails to connect, the ‘L’ symbol on the Jabra Sound+ app will remain greyed out.
you wanna learn how you add a Starbucks card to your apple wallet? if yes don’t worry checkout our step-by-step process on how to add your Starbucks card on apple wallet.
2. Charging Case Check: Is Your Elite 65t Charging Case Holding Charge?
If your right Earbud is working normally, that means the charging case is receiving and distributing charges, but perhaps it needs to be successful to the left Earbud.
The Jabra Sound+ app home screen or the LED on the charging case can indicate the battery status. If the case isn’t storing charge, the problem lies with the case, not the left Earbud.
3. Delivery of Charge: Is Your Elite 65t Charging Case Charging the Left Earbud?
If the charging case is receiving and storing charge, but the left Earbud isn’t working, the issue lies with how the case is delivering charge to the left bud.
A common fault with the Elite 65t case is that the magnets in the rubber cradle beneath each Earbud can become dislodged. These magnets register that the buds are in place and allow charge to be distributed accordingly.
Here’s how to fix this:
Step 1: Use a flathead screwdriver to remove the rubber cradle for the earbuds carefully. Insert the screwdriver near the hinge of the case for the best leverage. Adhesive holds The rubber in place, so some force is required.
Step 2: Once the rubber cradle is removed, turn it upside down. You’ll see a small rectangular magnet in the preformed rubber casing beneath each earbud seat.
If one or both magnets are loose, push them back into their slots (applying adhesive to the magnet is optional).
Replace the rubber cradle and check whether the charge is now being delivered to the left Earbud.
Check out our guide on how to delete your Klarna account.
How to Fix Your Jabra Elite 65t Left Earbud
Now that we know the potential culprits let’s look at how to fix them:
Ensure Both Earbuds Have Enough Charge
This might seem obvious, but it’s an easy step to overlook. Make sure both your earbuds have enough charge. If one Earbud is significantly less charged than the other, it may fail to work or connect. Place both earbuds in the charging case and wait for at least 10 minutes before using them again.
Clean the Earbuds and Charging Case
Dirt or dust on the connector pins on the earbuds or the charging case can prevent the earbuds from charging. To clean the earbuds and the charging case, use a lint-free cloth to gently wipe the connector pins and remove any dirt or dust.
Be careful not to use any liquid cleaning solutions as they may damage the internals of the earbuds.
Update the Firmware
Jabra regularly releases firmware updates for its products to fix bugs and improve performance. Make sure your Jabra Elite 65t earbuds are up to date. You can easily update the firmware using the Jabra Sound+ app on your smartphone.
Check Bluetooth Connection
If your earbuds are charged and turned on but still not working, try resetting the Bluetooth connection to your device. You can do this by going to the Bluetooth settings on your device, unpairing the earbuds, and then pairing them again. If this doesn’t work, you should clear the Bluetooth cache on your device.
Check Audio Balance Settings
Configured audio balance settings can prevent only one side of the earbuds from working. To check this, go to the audio settings on your device and ensure the balance slider is set to the middle.
Maintenance Tips for Your Jabra Elite 65t Earbuds
To prevent these issues from happening in the future, here are some maintenance tips for your Jabra Elite 65t earbuds:
Regularly Clean Your Earbuds and Charging Case: Regular cleaning can prevent dirt and dust from accumulating on the connector pins.
Keep Your Earbuds Updated: Regularly check for firmware updates and install them to keep your earbuds running smoothly.
Handle with Care: Be gentle when handling your earbuds and avoid dropping them, as this can cause damage.
Step-by-Step Guide to Pair Your Jabra Elite 65t Earbuds for Mobile Device
Follow these simple steps to connect your Jabra Elite 65t earbuds to your mobile device:
Enable Bluetooth: Start by turning on the Bluetooth connectivity on your mobile device.
Activate Pairing Mode: Hold the multifunction button on your earbuds for about 3 seconds until the LED light turns blue. This shows that your earbuds are currently in pairing mode.
Volume Button Press: Briefly press the volume button for 1 second. This step ensures your earbuds are ready to connect.
Select Your Earbuds: Navigate back to the Bluetooth settings on your mobile device. You should be presented with a list of available devices for pairing. Select your Jabra Elite 65t earbuds from this list.
Pairing Complete: Tap on your earbuds in the list, and your device will complete the pairing process. You should receive a notification confirming the successful connection.
Now, you’re all set to enjoy your favorite music, podcasts, or videos with high-quality sound from your Jabra Elite 65t earbuds.
If you’ve followed these steps and your earbuds are still not functioning correctly, it could be due to a technical fault. In such cases, visiting a nearby authorized service center and having a technician examine your earbuds is best.
Conclusion – Why is jabra elite 65t left earbud not working
If your Jabra Elite 65t left Earbud has been giving you a hard time, we trust this article has provided you with valuable insights and easy-to-follow troubleshooting steps. Remember, a glitchy device should be separate from you and your favorite music!
We encourage you to try these fixes and see if they can restore the harmony in your earbuds. With a little patience and the right guidance, you might be able to get your earbuds back in tune in no time.
We’re grateful for the time you’ve dedicated to pursuing this guide. We hope it has brought you one step closer to resolving your earbud woes. Here’s to uninterrupted, high-quality sound experiences with your Jabra Elite 65t earbuds. Happy listening!
Frequently ask question
How to Check the Battery Status of Your Jabra Elite 65t Earbuds?
To check the battery status of your earbuds, tap on the lid and remove the charging cable. Pay attention to the LED color.
A green light indicates a fully charged battery ready for use. Conversely, a red light suggests a low or empty battery, signaling the need for a recharge.
How to Troubleshoot Your Jabra Elite 65t Left Earbud?
If your left Earbud isn’t working properly, it may be set to phone or mono mode, allowing only one Earbud to function. Ensure your earbuds are set to dual mode. If they still don’t work, try charging, restarting them, or testing them on another device.
If these steps don’t resolve the issue, consider resetting your earbuds. If the problem persists, it might be time to seek technical assistance or check if your earbuds are still under warranty.
Why Choose Jabra Elite 65t Earbuds?
Compared to other earbuds on the market, Jabra Elite 65t earbuds stand out for their comfort, ease of use, and high-quality features. They boast superior sound quality, durability, and noise-cancellation features that are hard to find in budget earbuds.
Designed for extended wear, Jabra earbuds provide comfort for hours on end. Despite the emergence of new models like AirPods 2, Jabra earbuds remain a favorite among many users.
In summary, the Jabra Elite 65t earbuds offer top-notch sound and functionality in a sleek package. Whether you’re seeking wireless earbuds for the gym, commuting, or home use, the Jabra Elite 65t is a fantastic choice that delivers on all fronts.
The post you may like:
2 thoughts on “Why is jabra elite 65t left earbud not working (Step by Step Guide)”